LIFELINE, ANCHOR

Interface mainly intended for waterproofing substrates:- Trapezoidal-profile perforated steel trays with a thickness ≥ 0.63 mm- Chipboard panels with a thickness ≥ 18 mm- OSB w...

The interface comes in two versions:- ICJD S designed to fit seam spacings from 290 mm to 430 mm.- ICJD L designed to fit seam spacings from 460 mm to 600 mm.The AD diabolo ris...

These mounting plates are installed using four M10 stainless steel 304 toggle bolts.Supplied with the interface: 180 mm (7.1 in) stainless steel toggle anchors, stainless steel cap nuts, sealing washe...

When a load greater than 170 daN (382 lbf) is applied to the top of the post, the breakaway elements fail and the post extends by 40 mm (1.6 in). The aluminum tube is then released and the M12 rod ben...

Design and Prototyping of New SolutionsOur engineering department, equipped with a test bench, allows us to develop specific solutionsfor all your complex job sites, including:Anchoring on new constru...

Four heights available for straight rigid posts: 500 mm (19.7 in), 700 mm (27.6 in) and 1000 mm (39.4 in).One height available for the L-shaped rigid post: 700 mm (27.6 in) with a wall offset of 230 m...

The S12 start plate allows lifeline departures in three directions.Can be used on concrete support.

Lot de 2 bascules M10 de longueur 300mm ou 500mm.Diamètre de perçage : 35mm.Pour les supports de type :Bac support d'étanchéité ≥ 0.63mm.Contreplaqué bois ≥ 18mmPanneaux d'aggloméré, OSB &...

Lot de 16 vis autoforeuse Drillnox 5.5 - 25mm.Acier inoxydable Austénitique A4 Aisi 316 LPointe acier cémenté + rondelle Vulca Inox / EPDMRésistance à la corrosion > 30 cycles KesternichCA maxi : 18mm...

Lot de 12 Rivets Bulb Tite 7.7 lg 27mm.Rivet : Alu AlMg 5.Rondelle : Alu AlCuMg1CA.Rondelle étanche EPDMDiamètre de perçage : 7.8 à 8.2mm.Pose avec une riveteuse Gesipa Spécifique.Poids : 0.12kg

MINI Omega is specially designed for corrugated steel panels.It is standardized for pitches of 333mm,250mm and 200mm with a minimum gauge thickness 0.6mm.Fixing with self-drilling screws, rivets or ti...

The RH100 is designed to support CONEKT rail and cable lifelines, as well as any CONEKT anchor point compliant with EN 795 Type A, C, or D.FINISH:304 stainless steel + shot blastingFIXING METHOD:to be...

Standardized posts of 150 mm and 300 mmCustomizable heights available from 150 mm to 1000 mmMaterial: 316L stainless steel

- Use by up to 5 people simultaneously- Low deflection- Suitable for slopes up to 40°- Multi-function pack: anchor, energy absorber, corner- Possibility of working under tension- Multi-directional lin...

It can be installed in just a few minutes thanks to a brand-new, innovative locking system.Designed for access to telecommunication networks, industrial installations, wind turbines, and more.Connecti...