LIFELINE, ANCHOR

The installation of a CONEKT cable lifeline on a concrete slab is carried out using the P300 or P500 rigid concrete posts, depending on the desired height (300 mm or 500 mm).Technical specifications t...

The installation of a CONEKT cable lifeline on a concrete wall is carried out using the S12 or S13 wall end plates, selected according to the type of support.Technical specifications to be observed:Sp...

Spacing between intermediates: 15 mPeriodic inspection at least once every 12 monthsSimple and quick-to-install rangeSleek designUp to 4 users simultaneously

The CONEKT joint allows you to compensate for the slope of a roof when installing lifeline supports.If necessary, the joint can be divided to obtain a half-joint. To use the two separate parts indepen...

SUPER RANGE allows working under tension thanks to a machining design that delays cable slippage.Certified for 3 people. Allows one user to work under tension.Base plate material: 316L stainless steel...

ULTRA RANGE allows work in tension thanks to a machining that delays cable slippage.Approved for 3 people. Allows one user to work in tension.Base plate material: 316L stainless steelInsert material:...

Non-deformable anchor point. Specially designed for suspended work.Rotating anchor point in cast 304 stainless steel.Attachment with an M12 stainless steel bolt.Supplied with the anchor, a spacer, a f...

Single anchor point for steel deck roofingCan be used alone or as a complement to a lifelineThe connector carabiner attaches directly to the plateFixing on a single corrugationCompatible with the foll...

The energy absorber limits the force exerted on the supporting structure in the event of a fall. It is equipped with a Secur-Vit end fitting, a tension indicator, a finishing piece, and an integrated...

The OH absorber limits the force applied to the support structure in the event of a fall. It is equipped with a Secur-Vit end fitting, a tension indicator, a finishing cap, and features an integrated...

The energy absorber limits the force exerted on the supporting structure in the event of a fall.It allows the lifeline to be tensioned up to 100 daN. A graduated scale enables monitoring of cable tens...

The supplementary absorber allows positioning an absorber at both ends of the lifeline. A tension indicator enables monitoring of cable tension.When combined with a crimped S26 jaw, this absorber enab...

The connector allows two cables to be joined together using 10 crimps.The tube has a diameter of 13 mm.Composition: stainless steel 304Finish: electropolishedWeight: 100 g

The CONEKT tensioner allows cable tension adjustment. It is equipped with a Secur-Vit end fitting, a finishing piece, and an integrated starting plate.The cut-out section of the starting plate allows...