Telecombo - Non-Conductive Fiberglass 3-in-1 Combination Ladder
3-in-1 non-conductive fiberglass combination ladder with quick-latch hinge and built-in bubble level.
Advantages and strengths
Non-conductive fiberglass 3-in-1 combination ladder. Type IAA duty rating (375 lbs / 170 kg), OSHA + ANSI compliant. Sets up as A-frame stepladder, leaning ladder, or extension ladder. Quick-latch hinge. Full-width wall pad. Built-in bubble level. Ground Cue. Flared and Sure-Set feet.
Technical characteristics
| Combination Ladder TELECOMBO 6 marches | |
|---|---|
| Reference : | 13946-001 |
| characteristic.CANADA_LARGEUR_RANGEMENT | 2 ft 1 in (0.6 m) m |
| characteristic.CANADA_MODELE | 6 ft (1.8 m) |
| characteristic.CANADA_PORTEE_MAX_ESCABEAU | 10 ft 3 in (3.12 m) |
| characteristic.CANADA_PORTEE_MAX_EXTENSION | 12 ft 1 in (3.7 m) |
| characteristic.CANADA_POIDS | 35 lbs (15.9 kg) lb |
| Quantity : |
|
| Combination Ladder TELECOMBO 7 steps | |
|---|---|
| Reference : | 13947-001 |
| characteristic.CANADA_LARGEUR_RANGEMENT | 2 ft 4 in (0.7 m) m |
| characteristic.CANADA_MODELE | 7 ft (2.1 m) |
| characteristic.CANADA_PORTEE_MAX_ESCABEAU | 11 ft 2 in (3.4 m) |
| characteristic.CANADA_PORTEE_MAX_EXTENSION | 14 ft (4.3 m) |
| characteristic.CANADA_POIDS | 40.3 lbs (18.3 kg) lb |
| Quantity : |
|
| Combination Ladder TELECOMBO 8 steps | |
|---|---|
| Reference : | 13948-001 |
| characteristic.CANADA_LARGEUR_RANGEMENT | 2 ft 4 in (0.7 m) m |
| characteristic.CANADA_MODELE | 8 ft (2.4 m) |
| characteristic.CANADA_PORTEE_MAX_ESCABEAU | 12 ft 2 in (3.7 m) |
| characteristic.CANADA_PORTEE_MAX_EXTENSION | 15 ft 10 in (4.9 m) |
| characteristic.CANADA_POIDS | 43.5 lbs (19.7 kg) lb |
| Quantity : |
|
Use
The Telecombo is a 3-in-1 fiberglass combination ladder designed for technicians who need versatile, quick-to-deploy equipment without compromising safety when engaging the hinge.
A Hinge Built for Quick Verification
The Telecombo's quick-latch hinge lets users confirm visually and immediately that the ladder is properly engaged before climbing, reducing the risk of handling errors, particularly during frequent transitions between leaning and stepladder positions.
Reliable Support Against Any Surface
The non-marring grey wall pad spans the full width of the ladder, better distributing weight and reducing damage to work surfaces. It works on flat walls, in corners, on poles, and on studs.
Leaning Guidance and Safety on the Way Down
The built-in bubble level helps the user maintain the correct leaning angle in leaning position. The Ground Cue system produces an audible click at the bottom rung during descent, reducing the risk of missed-step falls.
Stability and Grip
The wide flared feet on the functional rear section provide added stability when climbing either side of the ladder in stepladder position. Sure-Set feet work in cushioned position indoors or spiked position outdoors for maximum grip.
Compliance Information
Type IAA duty rating: maximum capacity of 375 lbs (170 kg). OSHA + ANSI compliant. Available in 6, 7, and 8 feet.
Technical description
3-in-1 combination ladder: A-frame stepladder, leaning ladder, and extension ladder in a single tool
Quick-latch hinge: immediate visual check that the hinge is engaged before climbing
Full-width non-marring wall pad: usable on flat walls, corners, poles, and studs
Built-in bubble level: helps climb with the correct leaning angle
Ground Cue: audible click at the bottom rung on descent
Flared feet: added stability when climbing the rear section in stepladder position
Sure-Set feet: usable in cushioned position or spiked outdoors
Non-conductive fiberglass: safe for use near electrical hazards
Type IAA duty rating: 375 lbs (170 kg)
OSHA + ANSI compliant
Available in 6, 7, and 8 feet
4 shops in Canada
Specialist advice, Quotation in 48h
More than 30 years experience
48h shipping on our products in stock
