Complete Motorized Fiberglass 6 ft Baker Scaffold Kit
A ready-to-use complete kit: non-conductive fiberglass 6 ft Baker scaffold, guardrail, and Climb-N-Go motor included.
Advantages and strengths
Complete ready-to-use kit: non-conductive fiberglass 6 ft Baker scaffold, guardrail, and Climb-N-Go motor.
Platform with secure access trap door, compact design that fits through standard door frames.
4,500 ft (1372 m) range, 500 lb (227 kg) hauling capacity, ideal for electrical work thanks to the non-conductive material.
Technical characteristics
| Complete Motorized Fiberglass 6 ft Baker Scaffold Kit | |
|---|---|
| Reference : | I-CNGFK |
| characteristic.CANADA_DIMENSION | 73.80 x 30.85 x 111.50 in (187.45 x 78.36 x 283.21 cm) |
| characteristic.CANADA_POIDS | 178 lb (80.74 kg) lb |
| characteristic.CANADA_AUTONOMIE | 4,500 ft (1,372 m) |
| characteristic.CANADA_CAPACITE_TRACTAGE | 500 lb (226.79 kg) |
| Quantity : |
|
Use
All-in-one purchase
The I-CNGFK bundles the fiberglass 6 ft Baker scaffold, its guardrail, and the Climb-N-Go motor, eliminating the need to order components separately.
Ideal for electrical work
Non-conductive fiberglass, combined with durable, corrosion-resistant performance, makes it a safe choice for electrical environments.
Compact design
The scaffold fits through standard door frames, with a platform and secure access trap door.
Increased efficiency
Once motorized, the scaffold moves without needing to climb down, a significant time saver on indoor job sites.
Usage limits
Indoor use only, on a single floor, on level ground (maximum 3° slope); stacking multiple Bakers is prohibited when the motor is installed.
Technical description
Includes: 1 fiberglass 6 ft Baker scaffold with access trap door (I-CFISC), 1 guardrail system (I-CAISCGR), 1 Climb-N-Go motor (I-CNG).
Non-conductive, corrosion-resistant scaffold, compact design that fits through standard door frames.
Range: 4,500 ft (1372 m), tested with a 20V 4.0 Ah battery.
Motor hauling capacity: 500 lb (227 kg).
Powered by an 18-21V battery (not included), compatible with DEWALT, MAKITA, MILWAUKEE, STANLEY (18V), PORTER CABLE, BLACK & DECKER, BOSCH, and RIDGID (RIDGID adapter not included). All trademarks mentioned are the property of their respective owners; Metaltech is not affiliated with any of them.
The Climb-N-Go can only be used with a single 6 ft Baker scaffold (stacking prohibited), indoors only, on a single floor, on level ground (maximum 3° slope). Outriggers cannot be installed while the Climb-N-Go is in place. Not water resistant. Canadian patent 3,179,633.
4 shops in Canada
Specialist advice, Quotation in 48h
More than 30 years experience
48h shipping on our products in stock
