MSA Latchways Fixed Ladder Vertical Lifeline Kit, 3 to 55 m (10 to 180 ft)
A complete cable lifeline kit to protect every climb on fixed ladders, from 3 to 55 m (10 to 180 ft).
Advantages and strengths
Supplied as a complete kit with all fixings, this ladder safety system clamps directly onto the rungs with U-bolt brackets. The universal brackets fit round, square and diamond rungs, so most steel fixed ladders can be equipped.
The energy absorber at the top of the line limits the arrest force to less than 6 kN (1,350 lb). The cable and ladder-mounted components are 316 stainless steel and the top anchor is galvanized mild steel, making the system suitable for both indoor and outdoor installations.
The lifeline accommodates two simultaneous users and is adjusted on site to the actual ladder height, with excess cable cut off during tensioning. Ten lengths cover fixed ladders from 3 to 55 m (10 to 180 ft).
Technical characteristics
| MSA Latchways Vertical Ladder Lifeline Kit 10 ft (3 m) | |
|---|---|
| Reference : | 30923-00 |
| characteristic.CANADA_HAUTEUR_TOTALE | 10 ft (3 m) |
| Quantity : |
|
| MSA Latchways Vertical Ladder Lifeline Kit 20 ft (6 m) | |
|---|---|
| Reference : | 30924-00 |
| characteristic.CANADA_HAUTEUR_TOTALE | 20 ft (6 m) |
| Quantity : |
|
| MSA Latchways Vertical Ladder Lifeline Kit 40 ft (12 m) | |
|---|---|
| Reference : | 30925-00 |
| characteristic.CANADA_HAUTEUR_TOTALE | 40 ft (12 m) |
| Quantity : |
|
| MSA Latchways Vertical Ladder Lifeline Kit 60 ft (19 m) | |
|---|---|
| Reference : | 30906-00 |
| characteristic.CANADA_HAUTEUR_TOTALE | 60 ft (19 m) |
| Quantity : |
|
| MSA Latchways Vertical Ladder Lifeline Kit 80 ft (25 m) | |
|---|---|
| Reference : | 30907-00 |
| characteristic.CANADA_HAUTEUR_TOTALE | 80 ft (25 m) |
| Quantity : |
|
| MSA Latchways Vertical Ladder Lifeline Kit 100 ft (31 m) | |
|---|---|
| Reference : | 30908-00 |
| characteristic.CANADA_HAUTEUR_TOTALE | 100 ft (31 m) |
| Quantity : |
|
| MSA Latchways Vertical Ladder Lifeline Kit 120 ft (37 m) | |
|---|---|
| Reference : | 30909-00 |
| characteristic.CANADA_HAUTEUR_TOTALE | 120 ft (37 m) |
| Quantity : |
|
| Kit ligne de vie verticale MSA Latchways 43 m (140 pi) | |
|---|---|
| Reference : | 30910-00 |
| characteristic.CANADA_HAUTEUR_TOTALE | 140 ft (43 m) |
| Quantity : |
|
| MSA Latchways Vertical Ladder Lifeline Kit 140 ft (43 m) | |
|---|---|
| Reference : | 30911-00 |
| characteristic.CANADA_HAUTEUR_TOTALE | 160 ft (49 m) |
| Quantity : |
|
| MSA Latchways Vertical Ladder Lifeline Kit 160 ft (49 m) | |
|---|---|
| Reference : | 30912-00 |
| characteristic.CANADA_HAUTEUR_TOTALE | 180 ft (55 m) |
| Quantity : |
|
Use
Cette ligne de vie verticale pour échelle fixe s'installe sur les échelles en acier qui donnent accès aux toitures, réservoirs, silos, pylônes, passerelles techniques ou mezzanines. Elle sécurise le travail en hauteur lors des interventions d'entretien et de maintenance : une fois le système en place, l'utilisateur équipé d'un harnais se relie au câble avec l'antichute coulissant LadderLatch et monte ou descend les mains libres pour l'échelle, sans jamais se détacher.
Pour choisir la bonne référence, mesurez la hauteur de l'échelle et retenez la longueur de kit égale ou immédiatement supérieure, de 3 m (10 pi) avec la 30923-00 à 55 m (180 pi) avec la 30912-00 ; le câble est ajusté sur place. Vérifiez aussi la forme, la section et l'entraxe des barreaux. Si le dernier barreau ne permet pas de prendre pied sur la toiture ou la plateforme en restant attaché, optez pour la ligne de vie avec poteau d'extension. Dans tous les cas, prévoyez l'antichute LadderLatch 3103L-00, vendu séparément.
Technical description
The kit includes the galvanized top anchor with grommet (30071-00) and its fixing kit, the energy absorber and lifeline assembly with 8 mm (5/16 in) 1 x 19 construction 316 stainless steel cable, the helix intermediate cable guides (30034-00) with their universal ladder attachment brackets (30184-00), the bottom anchor with compression spring and tensioning device (35600-00), and the system label. The climbing device is not included.
Ten lengths are available: 30923-00 for 3 m (10 ft), 30924-00 for 6 m (20 ft), 30925-00 for 12 m (40 ft), 30906-00 for 19 m (60 ft), 30907-00 for 25 m (80 ft), 30908-00 for 31 m (100 ft), 30909-00 for 37 m (120 ft), 30910-00 for 43 m (140 ft), 30911-00 for 49 m (160 ft) and 30912-00 for 55 m (180 ft). Excess cable is cut off during tensioning.
The system clamps onto the ladder with U-bolt brackets and fits round rungs from 12 to 31.75 mm (0.47 to 1.25 in) in diameter, square rungs from 20 to 30 mm (0.79 to 1.18 in) or diamond rungs from 18 to 25 mm (0.71 to 0.98 in), with rung spacing from 225 to 305 mm (8.86 to 12 in). Ladder inclination must not exceed 15° from vertical.
The top anchor has a minimum static strength greater than 22 kN (5,000 lb). The energy absorber limits the arrest force to less than 6 kN (1,350 lb). The cable is tensioned to 1.2 kN (270 lb) from the bottom anchor, with correct tension confirmed by the rotating indicator disc. Intermediate cable guides are spaced no more than 4 m (13 ft) apart, reduced to 3 m (10 ft) where the site reference wind speed exceeds 30 m/s (67 mph) or the system is taller than 55 m.
The system is rated for a maximum of two simultaneous users equipped with the LadderLatch climbing device, each weighing 50 to 150 kg (110 to 330 lb). Only an approved LadderLatch device may be used on this system; part number 3103L-00 is the CSA Z259.2.5 compliant version. The climbing device is sold separately.
The ladder must be able to withstand fall arrest loads: CSA Z259.2.5 specifies a maximum arrest load of 8 kN (1,800 lb), with appropriate design factors applied to the structure. Installation must be carried out by a competent person trained on MSA Latchways systems, following the manufacturer's instructions without deviation. No component may be added, omitted or substituted, and in regions where CSA approval applies, only the ladder kits specified in the manufacturer's instructions are approved.
A rescue procedure must be in place before the system is put into service. Where a fall hazard exists at the access or exit point, an anchorage point must be provided so users can connect to and disconnect from the system safely. The lifeline must be inspected before each use and at least once a year, and the system label, fitted at the access point, records the installation date, maximum number of users, compatible climbing device and inspection dates.


