LIFELINE, ANCHOR

The matrix benefits from specific machining, allowing the cable to be oriented on each side.It is versatile and can be used both as entry or exit anchorage poit as well as an intermediate point.The en...

Geometry designed to pass cable splices and other technical components smoothly.All wear components are fully replaceable.Integrated wear indicatorReplaceable impact-resistant housingAluminium and dua...

Horizontal and vertical junction piece allowing all movements to be unified while limiting handling errors.Without any possible disconnection of the lifeline, operators are always safe.The system is m...

Multidirectional bifurcation cross that enables the user to go at ease in various areas without disconnecting from the line. It thus offers the possibility of doubling up to let a co-worker pass by wi...

The X-CONE can be used to secure slopes over 15° and up to 40°.

Stainless steel cable for safety lifeline, 7×19 strand, 10 mm

Multi-support anchor device allowing the connection of various elements as well as the closure of the lifeline.

Set of 2 components allowing the termination of the lifeline.The End Pack can be positioned at the end of the line or used to terminate at a crossover point.This component serves as a substitute for m...

New platform with automatic closing gate type "saloon".Work platform designed for all work up to 3,50 m (11') high.Ideal for finishing work such as electrical installation, painting, carpentry install...

The CONEKT rail lifeline lets you work safely at height. Thanks to its controlled deflection, it can easily be installed in areas with limited clearance. The rigidity of the rail also provides optimal...

The CONEKT rail lifeline lets you work safely at height. Thanks to its controlled deflection, it can easily be installed in areas with limited clearance. The rigidity of the rail also provides optimal...

Installing a CONEKT rail lifeline on a sandwich panel roof is done using:the PB1 base plate or the PB2 base plate, selected according to the wave/pitch width of your panelthe R25 short rail fixing to...

Installing a CONEKT rail lifeline on zinc boarding is done using:the ICZ interface, specifically designed for this type of substratethe R25 short rail fixing to attach the rail directly onto the inter...

Installing a CONEKT rail lifeline on a standing seam roof is done using:the IJDC narrow interface or the IJDL wide interface, both dedicated to this type of roof, selected according to the spacing bet...

Installing a CONEKT rail lifeline on a concrete slab is done using:the rigid post P300 or the rigid post P500, depending on the clearance height requiredthe R25 short rail fixing to attach the rail di...