COMPONENTS – MANUAL CABLE LIFELINE – CONEKT

This shuttle allows passage over automatic and overhead guides from the CONEKT range.It locks in the closed position using a carabiner supplied with the shuttle.Composition: stainless steel alloyFinis...

The trapezoidal steel deck must be ≥ 0.63 mm thick and have a trapezoidal profile. (For other types, please contact us).This product is standardized for wave widths of 500 mm, 400 mm, 333 mm, 25...

Interface mainly intended for waterproofing substrates:- Trapezoidal-profile perforated steel trays with a thickness ≥ 0.63 mm- Chipboard panels with a thickness ≥ 18 mm- OSB w...

The interface comes in two versions:- ICJD S designed to fit seam spacings from 290 mm to 430 mm.- ICJD L designed to fit seam spacings from 460 mm to 600 mm.The AD diabolo ris...

The ICZ interfaces are specifically developed to install CONEKT fall arrest systems on zinc roofs. This product is ideal for securing fall protection on Haussmann-style Parisian zinc roofs.These plate...

This post is installed using a set of 2 toggle bolts on waterproofing support deck sheets (excluding perforated ones). Two standard toggle lengths are available: 300 mm (ref. B300) and 500 mm (ref. B5...

4 possible heights for straight rigid posts: 300, 500, 700 and 1000 mm1 height available for the L-shaped rigid post: 700 mm with a wall offset of 23 cm (at the edge of the collar)The P300 and P500 po...

The S12 start plate allows lifeline departures in three directions.Can be used on concrete support.

Start plate fixed using 4 M12 anchors, providing sufficient resistance for use on supports other than concrete.Composition: S235 steelFinish: hot-dip galvanizedWeight: 1.2 kg

Lot de 2 bascules M10 de longueur 300mm ou 500mm.Diamètre de perçage : 35mm.Pour les supports de type :Bac support d'étanchéité ≥ 0.63mm.Contreplaqué bois ≥ 18mmPanneaux d'aggloméré, OSB &...

Lot de 16 vis autoforeuse Drillnox 5.5 - 25mm.Acier inoxydable Austénitique A4 Aisi 316 LPointe acier cémenté + rondelle Vulca Inox / EPDMRésistance à la corrosion > 30 cycles KesternichCA maxi : 18mm...

Lot de 12 Rivets Bulb Tite 7.7 lg 27mm.Rivet : Alu AlMg 5.Rondelle : Alu AlCuMg1CA.Rondelle étanche EPDMDiamètre de perçage : 7.8 à 8.2mm.Pose avec une riveteuse Gesipa Spécifique.Poids : 0.12kg

MINI Omega is specially designed for corrugated steel panels.It is standardized for pitches of 333mm,250mm and 200mm with a minimum gauge thickness 0.6mm.Fixing with self-drilling screws, rivets or ti...

The S12 start plate allows lifeline departures in three directions.Can be used on concrete support.

The RH100 is designed to support CONEKT rail and cable lifelines, as well as any CONEKT anchor point compliant with EN 795 Type A, C, or D.FINISH:304 stainless steel + shot blastingFIXING METHOD:to be...