COMPONENTS AUTOMATIC CABLE LIFELINE CONEKT
CONEKT components ensure smooth performance and safety for automatic cable lifeline systems.
The self-passing shuttles, corner brackets, and stainless steel cables allow continuous movement without manual handling.
Strong, modular, they provide long-lasting protection with easy maintenance.
The self-passing shuttles, corner brackets, and stainless steel cables allow continuous movement without manual handling.
Strong, modular, they provide long-lasting protection with easy maintenance.
display
CONEKT openable shuttle for cable lifeline
This shuttle allows passage over automatic and overhead guides from the CONEKT range.It locks in the closed position using a carabiner supplied with the shuttle.Composition: stainless steel alloyFinis...
CONEKT Plate for 2 swivels
The trapezoidal steel deck must be ≥ 0.63 mm thick and have a trapezoidal profile. (For other types, please contact us).This product is standardized for wave widths of 500 mm, 400 mm, 333 mm, 25...
CONEKT Plate for 4 toggles
Interface mainly intended for waterproofing substrates:- Trapezoidal-profile perforated steel trays with a thickness ≥ 0.63 mm- Chipboard panels with a thickness ≥ 18 mm- OSB w...
CONEKT Interfaces for standing seam roof
The interface comes in two versions:- ICJD S designed to fit seam spacings from 290 mm to 430 mm.- ICJD L designed to fit seam spacings from 460 mm to 600 mm.The AD diabolo ris...
CONEKT Interface on Zinc Roof
The ICZ interfaces are specifically developed to install CONEKT fall arrest systems on zinc roofs. This product is ideal for securing fall protection on Haussmann-style Parisian zinc roofs.These plate...
CONEKT Tilting Post H250mm
This post is installed using a set of 2 toggle bolts on waterproofing support deck sheets (excluding perforated ones). Two standard toggle lengths are available: 300 mm (ref. B300) and 500 mm (ref. B5...
CONEKT rigid concrete posts
4 possible heights for straight rigid posts: 300, 500, 700 and 1000 mm1 height available for the L-shaped rigid post: 700 mm with a wall offset of 23 cm (at the edge of the collar)The P300 and P500 po...
CONEKT 2-point wall end plate
The S12 start plate allows lifeline departures in three directions.Can be used on concrete support.
CONEKT 4-point wall end plate
Start plate fixed using 4 M12 anchors, providing sufficient resistance for use on supports other than concrete.Composition: S235 steelFinish: hot-dip galvanizedWeight: 1.2 kg
CONEKT Lot de 2 chevilles à bascules inox
Lot de 2 bascules M10 de longueur 300mm ou 500mm.Diamètre de perçage : 35mm.Pour les supports de type :Bac support d'étanchéité ≥ 0.63mm.Contreplaqué bois ≥ 18mmPanneaux d'aggloméré, OSB &...
CONEKT Lot de 16 vis autoforeuses + bande EPDM
Lot de 16 vis autoforeuse Drillnox 5.5 - 25mm.Acier inoxydable Austénitique A4 Aisi 316 LPointe acier cémenté + rondelle Vulca Inox / EPDMRésistance à la corrosion > 30 cycles KesternichCA maxi : 18mm...
Lot de 12 rivets + bande EPDM CONEKT
Lot de 12 Rivets Bulb Tite 7.7 lg 27mm.Rivet : Alu AlMg 5.Rondelle : Alu AlCuMg1CA.Rondelle étanche EPDMDiamètre de perçage : 7.8 à 8.2mm.Pose avec une riveteuse Gesipa Spécifique.Poids : 0.12kg
MINI OMEGA Stainless steel plate for steel roofs CONEKT
MINI Omega is specially designed for corrugated steel panels.It is standardized for pitches of 333mm,250mm and 200mm with a minimum gauge thickness 0.6mm.Fixing with self-drilling screws, rivets or ti...
CONEKT 2-point wall end plate
The S12 start plate allows lifeline departures in three directions.Can be used on concrete support.
4 shops in Canada
Specialist advice, Quotation in 48h
More than 30 years experience
48h shipping on our products in stock
