COMPONENTS – AUTOMATIC CABLE LIFELINE – CONEKT

The RH100 is designed to support CONEKT rail and cable lifelines, as well as any CONEKT anchor point compliant with EN 795 Type A, C, or D.FINISH:304 stainless steel + shot blastingFIXING METHOD:to be...

Standardized posts of 150 mm and 300 mmCustomizable heights available from 150 mm to 1000 mmMaterial: 316L stainless steel

The A 05 intermediate cable guide allows automatic passage of the A 01 and A 02 trolleys.Passing through intermediate points is smooth, even from a distance.Composition: stainless steel 304Finish: ele...

The OH06 inner corner and OH07 outer corner intermediate rollers allow automatic passage of A01 and A02 shuttles.

The A06 intermediate cable guide allows automatic passage of the A01 and A02 trolleys.The base plate is made of galvanized steel, and the guide is made of stainless steel 304.Composition: stainless st...

The A08 intermediate cable guide allows automatic passage of the A01 and A02 trolleys.This guide is bendable using the bending tool. Bends can be made in all directions.Composition: stainless steel 30...

Flexible cable made of 7 strands of 19 wires in stainless steel 316.With a fine braided appearance, its high flexibility allows for very easy installation. It tolerates tight bending radii for small s...

It is also designed to be mounted in combination with the toad brackets.It allows clamping the flanges of metal structures from 3 to 25 mm thick.

The energy absorber limits the force exerted on the supporting structure in the event of a fall. It is equipped with a Secur-Vit end fitting, a tension indicator, a finishing piece, and an integrated...

The OH absorber limits the force applied to the support structure in the event of a fall. It is equipped with a Secur-Vit end fitting, a tension indicator, a finishing cap, and features an integrated...

The energy absorber limits the force exerted on the supporting structure in the event of a fall.It allows the lifeline to be tensioned up to 100 daN. A graduated scale enables monitoring of cable tens...

The supplementary absorber allows positioning an absorber at both ends of the lifeline. A tension indicator enables monitoring of cable tension.When combined with a crimped S26 jaw, this absorber enab...

The connector allows two cables to be joined together using 10 crimps.The tube has a diameter of 13 mm.Composition: stainless steel 304Finish: electropolishedWeight: 100 g

The CONEKT tensioner allows cable tension adjustment. It is equipped with a Secur-Vit end fitting, a finishing piece, and an integrated starting plate.The cut-out section of the starting plate allows...